Accelerator
ACS Minespeed F1
ACS Minespeed F1 is a high quality, alkali free, Australian made solution type liquid accelerator for shotcrete systems.
Cement
ACS GP Cement
ACS GP Cement is a premium quality Portland Cement, fully compliant with AS3972 Type GP.
Concrete Cure & Finish
CCS Densifier
CCS Densifier is a water-based penetrating hardener, densifier, and dust proofer designed to increase abrasion resistance and reduce the surface absorption of liquids on concrete floors. CCS Densifier reacts with elements in the concrete surface to impart a low sheen which enhances the appearance of the surface whilst maintaining a natural concrete look. CCS Densifier…
CCS Aliphatic Alcohol
CCS Aliphatic Alcohol is a water based concrete finishing compound designed for use on freshly poured and screeded concrete. It is designed to reduce the evaporation of water during finishing processes such as troweling, and is great for reducing the effects of rapid drying when placing concrete during high temperatures, low humidity and high wind…
CCS Slab Clad R
Slab Clad R is a membrane-forming concrete curing compound that is based on C5 resin and combined with performance enhancing additives. When applied to freshly laid concrete, Slab Clad R forms a surface film that enables a high rate of moisture retention – assisting in the development of strength, abrasion resistance and durability. Slab Clad…
Flooring
ACS NeoLastic
ACS NeoLastic is an acrylic, latex admixture that can be used primarily as a primer and to further improve the bond strength and deformability of ACS Screed. The unique polymers within ACS NeoLastic also enable it to be used for waterproofing, dust proofing, as a primer and/or bonding agent for cement based renders and textures and an effective…
ACS Tile and Bed Sand
ACS Tile & Bed Sand is a specially graded coarse sand suitable for mixing with cement and for under tile screeds. It is double washed to remove fine sand, clay and silt, then kiln dried to minimise mould and organic matter. Graded to between 0.5mm and 1.5mm, this sand is smooth flowing and excellent to…
ACS Traditional Floor Screed
ACS Traditional Floor Screed is a mixture of double washed, graded coarse sands and cement. The sand used is rigorously screened and sieved to create a free flowing under tile screed that resists shrinking during drying. The majority of clay fines from the sand have been removed during washing to reduce water demand and subsequent…
Grouts
ACS Grout Comparison Chart
This handy chart provides an overview of ACS grout properties to assist in selection. Click on each grout name for further information. A downloadable pdf version with active links to products is in the download section to the right.
ACS Construction Grout
ACS Construction Grout can be used for general purpose grouting where it is necessary to eliminate shrinkage. However it is specifically designed as a ‘dry pack’ or ‘rammable’ grout. It is a versatile, non-shrink cement based grout. It is supplied as a ready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded…
ACS Grout UW
ACS Grout UW is a high strength, cement based grout designed for underwater grouting applications. This high performance grout contains a blend of Portland cements and special additives which enable it to achieve rapid strength development, complete shrinkage correction and an excellent bond. Grout UW is supplied as a ready to use powder which, when…
ACS Grout TC
ACS Grout TC is a medium strength, shrinkage compensated (non shrink) Bentonite based cement grout containing a blend of Portland cements, graded fillers and special additives which facilitate controlled expansion in both plastic and hardened states. Grout TC is supplied as a ready to use powder containing super plasticisers which when mixed with water, produces…
ACS Grout HF30
ACS Grout HF30 is a high strength, shrinkage compensated, low viscosity cement based grout containing a blend of selected premium grade cements, graded fillers and special additives which facilitate controlled expansion in both the plastic and hardened states. ACS Grout HF30 is designed to flow into voids and gaps with un-interrupted flow without being affected…
ACS Grout HES30
ACS Grout HES30 is a high strength, non-shrink cement based grout that can be used in a wide variety of situations. This high performance grout is a blend cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics. ACS Grout HES30 is supplied as a ready to use powder which…
ACS Grout GP
ACS Grout GP is a versaile, non-shrink cement based grout. It is supplied as aready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives.
Pipeline & Culvert Filling
ACS Grout HF30
ACS Grout HF30 is a high strength, shrinkage compensated, low viscosity cement based grout containing a blend of selected premium grade cements, graded fillers and special additives which facilitate controlled expansion in both the plastic and hardened states. ACS Grout HF30 is designed to flow into voids and gaps with un-interrupted flow without being affected…
ACS Grout HES30
ACS Grout HES30 is a high strength, non-shrink cement based grout that can be used in a wide variety of situations. This high performance grout is a blend cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics. ACS Grout HES30 is supplied as a ready to use powder which…
ACS Grout GP
ACS Grout GP is a versaile, non-shrink cement based grout. It is supplied as aready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives.
Shotcrete
ACS Shotcrete XL
ACS Shotcrete XL is a pre-packaged AS3972-2010 Portland cement based shotcrete mix that can be used in either wet or dry-mix processes. Caution should be observed when conducting overhead or vertical spraying applications with this product. Should overhead or vertical applications be common to the project, use of ACS Minespeed F1 shotcrete accelerator should also be considered. In overhead or vertical…
ACS Rapid Set Shotcrete
ACS Rapid Set Shotcrete is a pre-packaged multi-component cement based shotcrete mix for use in dry-mix processes. It is made with accurately mass-batched blends of Portland cement, silica fume, sand, coarse aggregate and powdered accelerator, and has been specifically designed for applications that require fast setting characteristics used in mining, tunnelling and civil projects. Rapid Set…
ACS Neat-Krete WR
ACS Neat-Krete WR is a pre-packaged, water resistant, cement based shotcrete product for use in mining, tunnelling and civil construction industries. ACS Neat-Krete WR is a single application product which due to its exclusive formulation, provide excellent adhesion of the shotcrete to hard and soft strata while also providing exceptionally low rates of rebound waste…
ACS Neat-Krete CI
ACS Neat-Krete CI is a pre-packaged multi-component cement based shotcrete mix for use in dry-mix processes. ACS Neat-Krete CI is made with accurately mass-batched blends of Portland cement, sand, coarse aggregate and specially formulated chemical admixtures
Underpinning
ACS Grout HF30
ACS Grout HF30 is a high strength, shrinkage compensated, low viscosity cement based grout containing a blend of selected premium grade cements, graded fillers and special additives which facilitate controlled expansion in both the plastic and hardened states. ACS Grout HF30 is designed to flow into voids and gaps with un-interrupted flow without being affected…
ACS Grout GP
ACS Grout GP is a versaile, non-shrink cement based grout. It is supplied as aready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives.
