menu

ACS Grout Comparison Chart

This handy chart provides an overview of ACS grout properties to assist in selection. Click on each grout name for further information. A  downloadable pdf version with active links to products is in the download section to the right.

ACS Construction Grout

ACS Construction Grout can be used for general purpose grouting where it is necessary to eliminate shrinkage. However it is specifically designed as a ‘dry pack’ or ‘rammable’ grout. It is a versatile, non-shrink cement based grout. It is supplied as a ready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded…

ACS Grout GP

ACS Grout GP is a versaile, non-shrink cement based grout. It is supplied as aready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives.

ACS Grout HES30

ACS Grout HES30 is a high strength, non-shrink cement based grout that can be used in a wide variety of situations. This high performance grout is a blend cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics. ACS Grout HES30 is supplied as a ready to use powder which…

ACS Grout HF30

ACS Grout HF30 is a high strength, shrinkage compensated, low viscosity cement based grout containing a blend of selected premium grade cements, graded fillers and special additives which facilitate controlled expansion in both the plastic and hardened states. ACS Grout HF30 is designed to flow into voids and gaps with un-interrupted flow without being affected…

ACS Grout TC

ACS Grout TC is a medium strength, shrinkage compensated (non shrink) Bentonite based cement grout containing a blend of Portland cements, graded fillers and special additives which facilitate controlled expansion in both plastic and hardened states.  Grout TC is supplied as a ready to use powder containing super plasticisers which when mixed with water, produces…

ACS Grout UW

ACS Grout UW is a high strength, cement based grout designed for underwater grouting applications.  This high performance grout contains a blend of Portland cements and special additives which enable it to achieve rapid strength development, complete shrinkage correction and an excellent bond. Grout UW is supplied as a ready to use powder which, when…

At ACS, our focus is on providing practical solutions and improving the application, life and performance properties of our products to not only meet specifications, but the ever increasing demands and safety requirements of the industries in which we operate. Using state of the art equipment, all products are a part of a continuous program of laboratory and field trials, research and standards testing. ACS also has a unique focus on high performance tailored formulations – developed at our Brisbane based R&D laboratory.

Product Focus

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Construction Grout

ACS Construction Grout is a versatile, non-shrink cement based grout. It is supplied as a ready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives. It can be used for general purpose grouting where it is necessary to eliminate shrinkage however it is specifically…