Acrylic Sealers
CCS Colour Master Sealer
CCS Colour Master Sealer is a clear, solvent based acrylic resin available in 12 colours, specially formulated to be mixed with CCS Colour Master Tint – a 2 litre colour pack of colourfast iron oxide pigments. When both parts are mixed thoroughly they create a long lasting opaque colour finish over concrete surfaces, available in…
CCS Same Day Sealer
CCS Same Day Sealer is a ready to use specially modified resin and solvent based acrylic sealer, designed for same day application to freshly poured concrete. Note: CCS Same Day Sealer is not a diluted version of CCS Hardseal. CCS Same Day Sealer is formulated using a soft acrylic resin purposely made for application to…
CCS Hi-Build Enduro
CCS Hi-Build Enduro is a high solids, ready to use, solvent based, premium strength acrylic sealer, formulated to protect and enhance the surface of decorative concrete and textured concrete pavers. The solution provides a longer lasting gloss film of limited flexibility with excellent resistance to tyre marking, sunlight, grease and oil.
CCS Petrol Resistant Sealer
CCS Petrol Resistant Sealer is formulated with a tough resin that does not soften when exposed to intermittent petrol spillage. In contrast, conventional acrylic sealers will soften and emulsify when petrol is spilt on them, causing the surface to become tacky and slippery. Designed as a minimum two coat system, Petrol Resistant Sealer provides excellent…
Concrete Cure & Finish
CCS Densifier
CCS Densifier is a water-based penetrating hardener, densifier, and dust proofer designed to increase abrasion resistance and reduce the surface absorption of liquids on concrete floors. CCS Densifier reacts with elements in the concrete surface to impart a low sheen which enhances the appearance of the surface whilst maintaining a natural concrete look. CCS Densifier…
CCS Aliphatic Alcohol
CCS Aliphatic Alcohol is a water based concrete finishing compound designed for use on freshly poured and screeded concrete. It is designed to reduce the evaporation of water during finishing processes such as troweling, and is great for reducing the effects of rapid drying when placing concrete during high temperatures, low humidity and high wind…
CCS Slab Clad R
Slab Clad R is a membrane-forming concrete curing compound that is based on C5 resin and combined with performance enhancing additives. When applied to freshly laid concrete, Slab Clad R forms a surface film that enables a high rate of moisture retention – assisting in the development of strength, abrasion resistance and durability. Slab Clad…
Industrial Epoxies
ACS Protecta Epoxy HB-100
ACS Protecta Epoxy HB-100 is a two-pack, 100% solids, solvent-free, low odour and low VOC epoxy coating system for internal concrete flooring. It exhibits good moisture, chemical and oil resistance with the ability to build virtually any thickness. It will provide a hard-wearing coating for most situations where a durable floor is required. ACS Protecta…
ACS Enviro Epoxy HB-100
ACS Enviro Epoxy HB-100 is a new generation self-priming, waterborne coating technology developed with the well-being of the applicator and environment in mind. It is a robust yet flexible coating that exhibits high moisture, chemical and oil resistance with the ability to build virtually any thickness. It will provide a durable, hard-wearing coating for heavy…
CCS Industrial Epoxy PR100
CCS Industrial Epoxy PR100 is a two-part 100% solids phenalkamine epoxy system with the ability to bond effectively to damp, green and oily concrete. It is very low viscosity, fast curing and specially formulated for protecting metal and concrete surfaces against corrosion and chemicals. It has exceptional water resistance properties and therefore is an ideal…
CCS Industrial Epoxy XT100
CCS Industrial Epoxy XT100 is a two-part 100%, low viscosity epoxy resin specially formulated for coating and protecting internal industrial and commercial concrete flooring. It will provide an extremely hard wearing surface in addition to high resistance against water, chemicals and oils with the ability to build virtually unlimited film thickness. Suitable for warehouse floors,…
Penetrating Sealers
CCS Stainblock Enricher WB
CCS Stainblock Enricher WB is a single pack, water-based penetrating sealer that provides excellent stain resistance and repels both water and oil. CCS Stainblock Enricher WB is designed as a protective sealer to penetrate into the capillaries of porous materials to permanently bond with the substrate render the surface, water and oil repellent. It will…
CCS Stain Block
CCS Stain Block is a high performance, silane based, deep penetrating sealer that provides long term protection to a variety of surfaces. Containing a high concentration of special fluoro polymers CCS Stain Block not only repels water, but also effectively repels oil and organic based stains. It offers better protection against staining than traditional silicone…
CCS Natural Seal Supreme HV
CCS Natural Supreme HV is a solvent based silane-siloxane penetrating sealer designed to protect both horizontal and vertical surfaces from the ingress of water and salts. Once it penetrates the surface, CCS Natural Supreme HV will produce a hydrophobic bond. Due to its penetrating capabilities CCS Natural Supreme HV does not change or alter the…
CCS Streetscape Sealer
CCS Streetscape Sealer is a waterborne, low VOC (Green Star IEQ-13 compliant), single component, penetrating silane-siloxane sealer designed to improve stain resistance to concrete, masonry, pavers, and porous natural stone from the ingress of water, salts and staining from food and beverages. CCS Streetscape Sealer also contains fluro-polymers which offer added resistance to staining from…
Polyurethane Sealers
ACS Grind & Seal PU30
ACS Grind & Seal PU30 is a solvent-based polyurethane coating designed to protect honed concrete surfaces. Special ingredients within the mix provide a clear, non-yellowing gloss finish that is durable and flexible with excellent chemical, stain, and wear resistance. Grind & Seal PU30 is suitable for use on interior and exterior applications.
CCS Armourgard SP
CCS Armourgard SP is a single pack, solvent based polyurethane coating specifically designed for concrete and cementitious surfaces. It’s also an ideal binder and finish surface coating for seamless flooring and honed concrete surfaces. CCS Armourgard SP contains special ingredients to provide an attractive clear, gloss, non-yellowing finish with durability, flexibility and excellent chemical, stain…
CCS Armourthane
CCS Armourthane is a two part high solids, high build, modified, solvent based polyurethane sealer coating formulated to provide a smooth hard wearing surface for concrete. CCS Armourthane contains special ingredients to provide an attractive, clear, non-yellowing finish with durability, flexibility and excellent chemical, stain and wear resistance. Available in Gloss (Standard Product) and Satin…
CCS Decrathane Gloss
CCS Decrathane Gloss is a clear, water based high performance, two component polyurethane coating system formulated to protect concrete from solvents, chemicals, oils and acids. It is ideal as a replacement for traditional epoxy based coatings where a gloss finish and less downtime is required.
CCS Decrathane Satin
CCS Decrathane Satin is a clear, water based high performance, two component polyurethane coating system formulated to protect concrete from solvents, chemicals, oils and acids. It is ideal as a replacement for traditional epoxy based coatings where a satin finish and less downtime is required.
Self Levelling Compounds
ACS Floor Pro Self Levelling Compound
ACS Floor Pro Self Levelling Compound is a cementitious self-levelling compound with outstanding flow, workability and bonding properties. ACS Floor Pro Self Levelling Compound is suitable where a thickness of between 3mm and 50mm is required and can be used over new or existing interior floors that have been properly prepared and primed with CCS…
ACS Floor Maestro Self Levelling Compound
ACS Floor Maestro Self Levelling Compound is a commercial grade cementitious self-levelling compound with outstanding flow, workability and bonding properties. ACS Floor Maestro Self Levelling Compound is suitable where a thickness of feather edge to 50mm is required and can be used over new or existing interior and exterior floors that have been properly prepared…