menu

ACS Neat-Krete CI

ACS Neat-Krete CI is a pre-packaged multi-component cement based shotcrete mix for use in dry-mix processes. ACS Neat-Krete CI is made with accurately mass-batched blends of Portland cement, sand, coarse aggregate and specially formulated chemical admixtures

ACS Neat-Krete WR

ACS Neat-Krete WR is a pre-packaged, water resistant, cement based shotcrete product for use in mining, tunnelling and civil construction industries. ACS Neat-Krete WR is a single application product which due to its exclusive formulation, provide excellent adhesion of the shotcrete to hard and soft strata while also providing exceptionally low rates of rebound waste…

ACS Rapid Set Shotcrete

ACS Rapid Set Shotcrete is a pre-packaged multi-component cement based shotcrete mix for use in dry-mix processes. It is made with accurately mass-batched blends of Portland cement, silica fume, sand, coarse aggregate and powdered accelerator, and has been specifically designed for applications that require fast setting characteristics used in mining, tunnelling and civil projects. Rapid Set…

ACS Shotcrete XL

ACS Shotcrete XL is a pre-packaged AS3972-2010 Portland cement based shotcrete mix that can be used in either wet or dry-mix processes. Caution should be observed when conducting overhead or vertical spraying applications with this product. Should overhead or vertical applications be common to the project, use of ACS Minespeed F1 shotcrete accelerator should also be considered. In overhead or vertical…

At ACS, our focus is on providing practical solutions and improving the application, life and performance properties of our products to not only meet specifications, but the ever increasing demands and safety requirements of the industries in which we operate. Using state of the art equipment, all products are a part of a continuous program of laboratory and field trials, research and standards testing. ACS also has a unique focus on high performance tailored formulations – developed at our Brisbane based R&D laboratory.

Product Focus

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Construction Grout

ACS Construction Grout is a versatile, non-shrink cement based grout. It is supplied as a ready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives. It can be used for general purpose grouting where it is necessary to eliminate shrinkage however it is specifically…