ACS Pitcrete WR 60 is a pre-packaged gypsum based sprayable grout ventilation control system, which, when compared to standard gypsum based products in the market, displays superior resistance to water absorption. The product is predominantly designed for use within, but not restricted to, mining applications.
A single application product, ACS Pitcrete WR 60 provides superior strength characteristics, premium water resistance qualities and a reduction in application time and costs.
It is particularly suitable for underground ventilation control devices and sealing applications. Because of its premium water resistance qualities, a waterproofing membrane is usually not required prior to application.
Recommended Uses
ACS Pitcrete WR 60 is typically used in underground mining applications for ventilation sealing, where there is a higher presence of water therefore requiring a product with higher than normal water resistance to moisture absorption.
Technical Properties
Typical properties when mixed with the appropriate amount of potable water and tested at 25ºC and 50% RH.
Application
The surface to be sprayed should be prepared by removing all unsound materials and debris.
ACS Pitcrete WR 60 can be applied in depths of 10 – 200mm in one pass depending on the spraying method used, as well as substrate and weather conditions.
ACS Pitcrete WR 60 may be applied over an extended time of two different shifts by cold bonding to the previous layer.
Cleaning
All tools should be rinsed with water immediately after use to remove all traces of ACS Pitcrete WR 60.
Storage
The product will keep indefinitely if kept dry and stored in its original condition.
The shelf life of the product may be reduced if subjected to moisture, high temperatures and high humidity.
Health and Safety
During use, avoid inhalation of dust and contact with the skin and eyes. Wear suitable clothing, gloves, eye protection and respiratory protective equipment.
If contact with the skin occurs, thoroughly clean the area with plenty of fresh water and soap. In case of contact with the eyes rinse with plenty of fresh water and seek medical advice.
If swallowed, seek medical attention immediately – do not induce vomiting.
For further information consult the Safety Data Sheet (SDS) and read the product label carefully before use.
Downloads
Features and Benefits
- Convenient and accurate – supplied ready to use under stringent quality control standards
- Single, easy application in dry-mix spray systems – saves time and labour costs
- Requires no waterproofing membrane due to high water resistance
- Cures to an off-white colour and therefore requires no over-coating
- Greater than 35% less dust characteristics for safer and easier application
- Minimal rebound in dry sprayed processes
- High early strengths for early re-entry to work area
Packaging
ACS Pitcrete WR 60 is available in 20kg bags or 1.1 tonne bulk bags.
For further information consult the Safety Data Sheet (SDS) and read the Technical Data Sheet (TDS) carefully before use. SDS and TDS documents are available in the Resources section of this website and by contacting ACS Customer Service support line on 07 3412 8111 or 1800 077 744.