menu

ACS Grout TC is a medium strength, shrinkage compensated (non shrink) Bentonite based cement grout containing a blend of Portland cements, graded fillers and special additives which facilitate controlled expansion in both plastic and hardened states. 

Grout TC is supplied as a ready to use powder containing super plasticisers which when mixed with water, produces a free flowing, rammable, pumpable precision grout for use with heat loop systems and other related applications.

Uses

ACS Grout TC has been designed for use in the geo-exchange (geothermal) industry specifically to minimize bleed and segregation in grouting and sealing bore holes containing heat loop systems and other related applications.

Mixing

ACS Grout TC should be mixed using a high speed drill and spiral mixer, mechanical grout mixer, or a suitable high sheer drum mixer. DO NOT MIX MATERIAL BY HAND.

Because continuous grout flow is essential, ensure that the mixing method and labour is sufficient to enable continuity of the operation.

Add the correct measured water content into the mixing vessel, to achieve the selected consistencies. the amount of clean water to be added per 20kg bag should be 5.0 – 5.5 litres.

Temperature and Working Limitations

For maximum performance, it is important to maintain the grout, heat loops or other relevant grout contactable material within a temperature range of 18 – 25°C prior to, during and 48 hours following placement of the grout. 

Grouting should not take place if the temperature is 5°C or lower. Warm water can be used to accelerate strength development during colder weather.

When temperatures exceed 30°C, grouting should be sheltered from the heat or conducted early morning. Keep materials cool and use cold water in the mix.

Cleaning

All tools should be rinsed with water immediately after use to remove all traces of ACS Grout TC.

Health and Safety

During use, avoid inhalation of dust and contact with the skin and eyes. Wear suitable clothing, gloves, eye protection and respiratory protective equipment.

If contact with the skin occurs, thoroughly clean the area with plenty of fresh water and soap. In case of contact with the eyes rinse with plenty of fresh water and seek medical advice.

If swallowed, seek medical attention immediately – do not induce vomiting.

For further information consult the Safety Data Sheet (SDS) and read the product label carefully before use.

Features and Benefits
  • High initial flow and excellent flow retention
  • High 28 day strengths and low permeability ensure durability of the hardened grout
  • Excellent resistance to sub-terrainian minerals, vibration and compression
  • Chloride free, non-corrosive to steel, iron or copper
  • Pre-packaged ready to use grout to ensure batching and blending consistency and error-free on-site convenience
  • Ideal for pumping, ramming and pouring in a number of environmental conditions including geothermal applications.
Packaging

ACS Grout TC is available in:

  • 20kg Bags
  • 1000kg Bulk Bags

For further information consult the Safety Data Sheet (SDS) and read the Technical Data Sheet (TDS) carefully before use. SDS and TDS documents are available in the Resources section of this website and by contacting ACS Customer Service support line on 07 3412 8111 or 1800 077 744.

At ACS, our focus is on providing practical solutions and improving the application, life and performance properties of our products to not only meet specifications, but the ever increasing demands and safety requirements of the industries in which we operate. Using state of the art equipment, all products are a part of a continuous program of laboratory and field trials, research and standards testing. ACS also has a unique focus on high performance tailored formulations – developed at our Brisbane based R&D laboratory.

Product Focus

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Construction Grout

ACS Construction Grout is a versatile, non-shrink cement based grout. It is supplied as a ready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives. It can be used for general purpose grouting where it is necessary to eliminate shrinkage however it is specifically…