menu

ACS Bio Agi Shield is an advanced action formula of speciality non-hazardous oils and vegetable oil derivatives and is designed specifically for use in releasing concrete casts from metallic surfaces and moulds.

Uses

ACS Bio Agi Shield is ideal for use in coating concrete mixers, pumps and other equipment used in concrete production.

ACS Bio Agi Shield will shield the equipment from adhesion of wet mixed concrete, grout or other cementitious products and also halt the advance of rust developing on exposed steel surfaces.

ACS Bio Agi Shield is also recommended for use in the Precast and Concrete Tile manufacturing industries.

Its low voc formula also makes it suitable for use in other industries where cement based products is manufactured.

Mixing and Application

Wet Mix and Precast Concrete Manufacture 

Apply ACS Bio Agi Shield undiluted by spray, brush or mop.

Apply at a rate of 50-100m. / L or as little as possible whilst ensuring a thorough and even coverage over the entire working surface of the mould. This should provide optimum performance and minimize the potential for sticking, uneven release and build up. Excess material may compromise performance so remove with a mop or soft cloth.

If applying by hand sprayer, it should have a cap type filling device to allow easy filling without the possibility of dust contamination. It should also be fitted with a suitably sized flat fan nozzle and appropriate tip strainer.

A superior finish may be attained by applying with a damp clean soft flannel cloth.

CAUTION: Avoid use on rubber or latex fitting or moulds as ACS Bio Agi Shield can penetrate these material and cause shape distortion. Viton is generally recommended for seals and fittings.

Concrete Tile Manufacturer

Apply ACS Bio Agi Shield at 3-5g / mould. Specialist advice on application equipment may be required. Contact ACS for further details.

Storage

ACS Bio Agi Shield can be stored for at least 1 year when stored indoors at temperatures below 40° C and in closed original containers.

Avoid exposure to air for prolonged periods.

Product may thicken or solidify if cooled below 0°C.

Do not allow water to contaminate product.

Bulk Storage vessels made of stainless steel, fibreglass, polypropylene or polyethylene are preferred. It is strongly recommended to thoroughly clean old mild steel tanks before storage as ACS Bio Agi Shield may cause rust and other old deposits to be released resulting in contamination. Long term storage in mild steel tanks may result in product discolouration and other degradation.

Health and Safety

During use, avoid inhalation of dust and contact with the skin and eyes. Wear suitable clothing, gloves, eye protection and respiratory protective equipment.

If contact with the skin occurs, thoroughly clean the area with plenty of fresh water and soap. In case of contact with the eyes rinse with plenty of fresh water and seek medical advice.

If swallowed, seek medical attention immediately – do not induce vomiting.

For further information consult the Safety Data Sheet (SDS) and read the product label carefully before use.

Downloads
Features and Benefits
  • Designed to provide high level of operator health and safety, and to minimise adverse impact on the environment
  • Formulated to create excellent release characteristics
  • Can provide a class 1 – 2 finish to concrete surfaces
  • Suitable for both heated or ambient cured situations
  • Resists build up on moulds, assists in rust protection and promotes easy clean up
  • Maintains performance and workability at low temperatures
  • Very cost effective due to its low use rate
  • Most economical compared to other vegetable based release agents
  • Not classified as a Dangerous Good enabling more flexible and convenient storage, handling and transportation
  • Environmentally friendly – unique formulation provides faster and more complete biodegradation for a cleaner and safer environment
Standards Compliance

ACS Bio Agi Shield is not classified as a hazardous product according to the criteria of Worksafe Australia nor is it classified as a dangerous good.

Packaging

ACS Bio Agi Shield is available in:

  • 20 litre Containers
  • 200 litre Drums
  • 1000 litre IBC’s

For further information consult the Safety Data Sheet (SDS) and read the Technical Data Sheet (TDS) carefully before use. SDS and TDS documents are available in the Resources section of this website and by contacting ACS Customer Service support line on 07 3412 8111 or 1800 077 744.

At ACS, our focus is on providing practical solutions and improving the application, life and performance properties of our products to not only meet specifications, but the ever increasing demands and safety requirements of the industries in which we operate. Using state of the art equipment, all products are a part of a continuous program of laboratory and field trials, research and standards testing. ACS also has a unique focus on high performance tailored formulations – developed at our Brisbane based R&D laboratory.

Product Focus

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Rapidseal VCD Grout

ACS Rapidseal VCD Grout has been specifically designed to enable the installation of a cost effective and permanent sealing system within underground coal mines – for the purpose of ventilation control and ground support.  The non toxic product is installed using a Langley grout placer pump or similar. By adjusting the water content of water…

CCS Industrial Epoxy XT100

CCS Industrial Epoxy XT100 is a two part, civil grade, 100% solids epoxy resin coating specially formulated for industrial and commercial concrete floors where a long lasting and durable surface is required. CCS Industrial Epoxy XT100 penetrates deep into concrete to seal, protect and provide a high level of resistance to chemicals, corrosive compounds and…

ACS Grout HES30

ACS Grout HES30 is a high performance, cement based grout that has been specifically designed to minimise bleed and segregation and is suitable for a wide variety of applications. Made from a blend of cements, graded aggregates and special additives which provide rapid strength development and excellent bonding characteristics, Grout HES30 is supplied as a ready to use…

ACS Construction Grout

ACS Construction Grout is a versatile, non-shrink cement based grout. It is supplied as a ready to use powder, which is made up of a blend of Portland cement, pozzolanic material, graded fillers and chemical additives. It can be used for general purpose grouting where it is necessary to eliminate shrinkage however it is specifically…